Explosion-proof LED Lightings(Intelligent Type)
Explosion-proof LED Lightings(Intelligent Type)
• Explosion protection to
– CENELEC
– IEC
– NEC
• Can be used in
– Zone 1 and Zone 2
– Zone 21 and Zone 22
– Class I, Zone 1 and Zone 2
– Class I, Division 1, Groups A, B, C, D
• Two enclosure types: 50, 100
• Isolated LED lamp compartment, CC-CV (constant current – constant voltage) power controller compartment and terminal compartment; wind-convection heat dissipation structure
• Low-maintenance due to long service life, which is up to 100,000 operating hours
• Luminaries feature adjustable brightness for efficient energy-saving lighting
• When used with an intelligent lighting system, they enable centralized intelligent management and control of lighting equipment
Global (IECEx)
Gas and dust
IECEx (applied for)
Ex db IIC T6/T5/T4 Gb
Ex tb IIIC T80°C/T85°C/T95°C/T100°C Db
Europe (ATEX)
Gas and dust
ATEX (applied for)
II 2 G Ex db IIC T6/T5/T4 Gb
II 2 D Ex tb IIIC T80°C/T85°C/T95°C/T100°C Db
IECEx; ATEX; CU-TR
EN 60079-0, EN 60079-1, EN 60079-31
IEC 60079-0, IEC 60079-1, IEC 60079-31
Enclosure
Copper-free aluminium alloy, powder coated surface, yellow (RAL1021)
Transparent cover
Toughened glass, stands 4J impact
Exposed fastener
Stainless steel
LED driver
Wide voltage input, CC-CV (constant current – constant voltage) output, power factor ≥0.95,
with function of distributed current, constant current, surge-proof and anti-electromagnetic interference,
and protection against overcurrent, open circuit, and short circuit
Lamp specification
LED
Lamp power (W)
30W, 50W, 70W, 100W
Colour rendering index (Ra)
≥80
Colour temperature (CCT)
5700K
Note: cool white is available in general. Warm white or nature white is optional, please specify when ordering.
100–277V AC 50/60Hz
M5 (internal & external earth bolts)
IP66
30W, 50W: T6/T80°C for Tamb: -20°C~+43°C; T5/T95°C for Tamb: -20°C~+58°C
70W, 100W: T5/T85°C for Tamb: -20°C~+43°C; T4/T100°C for Tamb: -20°C~+58°C
3×1.5–4mm² (L+N+PE)
Ceiling type, pendant pole type, wall type, bracket type, hook type, fence type
M25×1.5
See Mounting type (see P2/53)
Φ10–Φ14 (mm)