Explosion-proof LED Lightings(Intelligent Type)
Explosion-proof LED Lightings(Intelligent Type)
• Explosion protection to
– CENELEC
– IEC
– NEC
• Can be used in
– Zone 1 and Zone 2
– Zone 21 and Zone 22
– Class I, Zone 1 and Zone 2
– Class I, Division 2, Groups A, B, C, D
• Two enclosure types: 90, 160
• Isolated LED lamp compartment, CC-CV (constant current – constant voltage) power controller compartment and terminal compartment; wind-convection heat dissipation structure
• International brand white light LED, reasonable arrangement of multi LED, high lighting efficiency and long service life
• Two types of light distribution: spotlight and floodlight, which can be selected on request
• Low-maintenance due to long service life, which is up to 100,000 operating hours
• Luminaries feature adjustable brightness for efficient energy-saving lighting
• When used with an intelligent lighting system, they enable centralized intelligent management and control of lighting equipment
Global (IECEx)
Gas and dust
IECEx (applied for)
Ex db op is IIC T□ Gb
Ex tb op is IIIC T□ Db IP66
Europe (ATEX)
Gas and dust
ATEX (applied for)
II 2 G Ex db op is IIC T□ Gb
II 2 D Ex tb op is IIIC T□ Db IP66
IECEx; ATEX; CU-TR
EN 60079-0, EN 60079-1, EN 60079-28, EN 60079-31
IEC 60079-0, IEC 60079-1, IEC 60079-28, IEC 60079-31
Enclosure
Copper-free aluminium alloy, powder coated surface, yellow (RAL1021)
Glass cover
Toughened glass, stands 4J impact
Exposed fastener
Stainless steel
LED driver
Wide voltage input, CC-CV (constant current – constant voltage) output, power factor ≥0.95,
with function of distributed current, constant current, surge-proof and anti-electromagnetic interference,
and protection against overcurrent, open circuit, and short circuit
Lamp specification
LED module
Lamp power (W)
Type 60: 60W, 90W
Type 160: 120W, 160W
Colour rendering index (Ra)
≥80
Colour temperature (CCT)
5700K
Note: cool white is available in general. Warm white or nature white is optional, please specify when ordering.
100–277V AC 50/60Hz
M5 (internal & external earth bolts)
IP66
-40°C~+55°C (+40°C)
3×1.5–4mm² (L+N+PE)
Bracket type, hook type, pole type, pendant pole type, wall type, ceiling type
1×M25×1.5 (hook type, pole type, pendant pole type)
2×M25×1.5 (bracket type)
4×M25×1.5 (wall type, ceiling type)
DQM-II (Ex d) or DQM-III (Ex d) is recommended.