Warom

WAROM Technology MENA FZCO

Total, custom solution provider, offering full scope of WAROM brand and services to our clients in the Middle East and North Africa, with singular focus on the needs of our client

Plot No.S10103, Jebel Ali Free Zone,
Dubai, UAE, P.O.Box 263667

Back to top

BAY51-Q Series

Explosion-proof Light Fittings for Fluorescent Lamp

  • Explosion protection compliant with CENELEC, IEC, and NEC standards
  • Suitable for hazardous areas:
    • Zone 1 and Zone 2
    • Zone 21 and Zone 22
    • Class I, Zone 1 and Zone 2
    • Class I, Division 2, Groups A, B, C, D
  • Two enclosure types available: Type I and Type II
  • Compatible with T8 fluorescent lamps:
    • 18W × 1, 36W × 1, 18W × 2, 36W × 2
  • Enclosure made of glass fiber reinforced polyester (GRP) with polycarbonate diffuser, corrosion-proof
  • Ex e enclosure with explosion-proof internal components
  • Safety interlock between enclosure and diffuser, switches off on opening
  • Built-in electronic ballast with power factor ≥ 0.95
  • Emergency unit with protection against overcharge and over-discharge
  • End-of-lamp-life (EOL) rectification effect protection
Explosion Protection
  • Gas: II 2 G Ex d e q IIC T4 Gb
  • Dust: II 2 D Ex t IIIC T80°C Db IP66
  • Certifications:
    • LCIE 12 ATEX 3045X
    • IECEx COM 07.0007
    • RLC-CN F05.8.00344 (CU-TR)
    • TÜV CY 18 ATEX 02027X; IECEx COM 12.0002X; CU-TR
Conformity to Standards
  • EN 60079-0, EN 60079-1, EN 60079-5, EN 60079-7, EN 60079-31
  • IEC 60079-0, IEC 60079-1, IEC 60079-5, IEC 60079-7, IEC 60079-31
Material
  • Enclosure: GRP, high impact resistance, corrosion-proof
  • Diffuser: Polycarbonate, 90% light transmission, impact resistant
  • Ballast: Electronic ballast with protection against short circuit, overload, lamp aging, and lamp damage
Construction
  • Exposed fasteners: Stainless steel
  • Interlock: BZX4 explosion-proof distance switch, switches off when opened
Lamp Details
  • Lamp type: T8 fluorescent tube (supplied with fittings)
  • Power options:
    • 36W × 2 / 18W × 2
    • 36W × 1 / 18W × 1
Emergency Lighting (where applicable)
  • Emergency power: 36W × 1 / 18W × 1
  • Emergency starting time: 0.3 s
  • Charging time: 24 h
  • Emergency lighting duration: 120 min (180 min optional)
Electrical
  • Rated voltage: 96–254V AC
  • Frequency: 50/60Hz
Protection & Environment
  • Degree of protection: IP66 (IP67 optional)
  • Ambient temperature: -20°C to +55°C
Installation
  • Terminals: 3 × 1.5–4 mm² (L + N + PE)
Cable Entries
  • Standard configuration:
    • 4 × Ø26
    • 2 × M25 × 1.5 cable glands
    • 2 × M25 × 1.5 plugs
  • Thread specification: DQM I/I
  • Pole-mounted version:
    • 1 × M25 cable gland
    • Top cable gland not provided
  • Available cable outer diameter: Ø9–Ø16 mm
Safety Features
  • Safety interlock system switches off power when enclosure is opened
  • End-of-lamp-life (EOL) protection
  • Protection against overcharge and over-discharge