Explosion-proof Emergency Light Fittings
● Explosion protection to
● Can be used in
Zone 1 and Zone 2
Class I, Zone 1 and Zone 2
Class I, Division 1, Groups C, D
● Enclosure in Copper-free Aluminium Alloy, powder coated surface, yellow (RAL1021).
● Lighting angle can be adjusted.
● Low-power halogen tungsten lamps, with reflector to increase lighting intensity.
● Emergency device with Ni-MH batteries, charging automatically; when power supply is cut off, the emergency device starts to work; with overcharge and overdischarge protection.
● Toughened glass cover resistant to temperature changes.
IECEx CQM 08.0001
Ex d IIB T4
LCIE 07 ATEX 6086
II 2 G Ex d IIB T4
IECEx; ATEX
EN 60079-0, EN 60079-1
IEC 60079-0, IEC 60079-1
Copper-free Aluminium Alloy, powder coated surface, yellow (RAL1021)
Stainless steel
220~240V AC 50/60Hz
Halogen tungsten lamp (LED on request)
2×10W (LED lamp power: 2×1W)
90min
Halogen tungsten lamp: 2×100lm (LED lamp: 2×90lm)
Ni-MH battery
6Ah
6V
300mA
1000mA
24h
IP65
-20°C ~ +55°C
3×1.5~2.5mm² (L+N+PE)
2×M25×1.5 plugs
DQM-II (Ex d) or DQM-III (Ex d) is recommended. Please see P6/24~39.
5.05kg
