Explosion protection
Global (IECEx)
IECEx CQM 24.0001X
Gas and dust
Ex db eb mb IIC T5/T4 Gb
Ex tb IIIC T70°C/T90°C Db
Europe (ATEX)
TÜV CY 25 ATEX 0207222 X
Gas and dust
II 2 G Ex db eb mb IIC T5/T4 Gb
II 2 D Ex tb IIIC T70°C/T90°C Db
See Selection Table
Certificates
IECEx; ATEX
Conformity to standards
EN 60079-0, EN 60079-1, EN 60079-7, EN 60079-18, EN 60079-31
IEC 60079-0, IEC 60079-1, IEC 60079-7, IEC 60079-18, IEC 60079-31
Material
Enclosure
Copper-free Aluminium Alloy, powder coated surface, yellow (RAL1021)
Diffuser
Polycarbonate, stands 4J impact
LED driver
Wide voltage input, CC-CV (constant current – constant voltage) output, with function of distributed current, constant current, surge-proof and anti-electromagnetic interference, and protection against overcurrent, open circuit, and short circuit
Exposed fastener
Stainless steel
Lamp
Lamp specification
LED module (supplied with the light fittings)
Lamp power (W)
20W, 40W, 60W
Colour rendering index (Ra)
≥80
LED Colour temperature (CCT)
5000K
Note: nature white is available in general. Warm white or cool white is optional, please specify when ordering
Rated voltage
100-277V AC 50/60Hz; 130-250V DC
Earthing protection
M4 (internal & external earth bolts)
Degree of protection
IP66
Ambient temperature
-40°C ~ +60°C (+58°C) (+40°C)
See Selection Table
Terminal
3×1.5~4mm² (L+N+PE)
Cable entries
2×M25×1.5 plugs
Emergency data
Emergency unit
Special emergency controller and battery pack, with protection against overcharge and overdischarge
Emergency power (W)
20W×70%, 40W×35%, 60W×23%
Emergency starting time
0.3s
Charging time
24h
Emergency lighting time
90min (180min is optional)
Battery
Ni-Cd (Ni-MH is optional)
